Hla, we had an Oxford magnet that had a leak at that spot. This was before
I was in my current role, but I believe re-soldering the joint solved the
leak.
However, we had to be extra careful on fills to not break the solder when
screwing or unscrewing anything on the fill port.
Good luck in finding a solution!
Best,
Peter
On Mon, Sep 30, 2024, 20:54 Hla Win via groups.io wrote:
> I have attached a few pictures in this mail. The area where the leak is,
> tape it off with electrical tape. I have contacted several people to
> access the magnet. I thought it's an o-rings, but then it's not. I hope
> to resolve the issue soon.
> Thanks.
> Hla
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#1678): https://urldefense.com/v3/__https://ammrl.groups=
.io/g/main/message/1678__;!!PvDODwlR4mBZyAb0!S9rsYO3nLveBvUeNfqofpa7wvcheXA=
GBpHGHoM2lP-w8HajC2_xEbUTchN30CrZTH2v6_AAZDANchukob129bzQyAw6S$
Mute This Topic: https://urldefense.com/v3/__https://groups.io/mt/108738789=
/7559972__;!!PvDODwlR4mBZyAb0!S9rsYO3nLveBvUeNfqofpa7wvcheXAGBpHGHoM2lP-w8H=
ajC2_xEbUTchN30CrZTH2v6_AAZDANchukob129bz2h-oGj$
Mute #heliumrecovery:
https://urldefense.com/v3/__https://ammrl.groups.io/g/=
main/mutehashtag/heliumrecovery__;!!PvDODwlR4mBZyAb0!S9rsYO3nLveBvUeNfqofpa=
7wvcheXAGBpHGHoM2lP-w8HajC2_xEbUTchN30CrZTH2v6_AAZDANchukob129bwqQ1E6t$
Group Owner: main+owner_at_ammrl.groups.io
-=-=-=-=-=-=-=-=-=-=-=-
Received on Tue Oct 01 2024 - 05:41:22 MST