Dear AMMRLers,
We had a 600 MHz Agilent DDR2 system.
I recently noticed the proton channel (1st channel) tune has some problems.
It shows very noisy signals (first picture). But the carbon channel (channel 2)
is normal.
If I swapped the cables on the VFS between channel 1 and channel 2, and the
proton went back to normal and I am having troubles with carbon tune now.
(proton tune back to normal 2nd picture).
When I check the signals coming out from the VFS on channel 1 and channel 2
with an oscilloscope, the "problematic" channel 1 signals look like 3rd picture
and the normal channel 2 signals look like the last picture.
Does this mean this VFS board has problems? If so, is there an easy way to
fix it?
Thanks,
Penghui
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#2091): https://urldefense.com/v3/__https://ammrl.groups=
.io/g/main/message/2091__;!!PvDODwlR4mBZyAb0!QzeagAhS1j1X31_djYRK0OWvxwuVDx=
XmH5CS3C246999Rr81o-pmzmqPwWxBaEhHHNZV5eAR7Csgr6YCleJJ-vp1yoi6$
Mute This Topic: https://urldefense.com/v3/__https://groups.io/mt/111440908=
/7559972__;!!PvDODwlR4mBZyAb0!QzeagAhS1j1X31_djYRK0OWvxwuVDxXmH5CS3C246999R=
r81o-pmzmqPwWxBaEhHHNZV5eAR7Csgr6YCleJJ-tTyV_ia$
Mute #varianagilent:
https://urldefense.com/v3/__https://ammrl.groups.io/g/m=
ain/mutehashtag/varianagilent__;!!PvDODwlR4mBZyAb0!QzeagAhS1j1X31_djYRK0OWv=
xwuVDxXmH5CS3C246999Rr81o-pmzmqPwWxBaEhHHNZV5eAR7Csgr6YCleJJ-j7RYfe3$
Mute #agilent:
https://urldefense.com/v3/__https://ammrl.groups.io/g/main/mu=
tehashtag/agilent__;!!PvDODwlR4mBZyAb0!QzeagAhS1j1X31_djYRK0OWvxwuVDxXmH5CS=
3C246999Rr81o-pmzmqPwWxBaEhHHNZV5eAR7Csgr6YCleJJ-okw1ehe$
Mute #hardware:
https://urldefense.com/v3/__https://ammrl.groups.io/g/main/m=
utehashtag/hardware__;!!PvDODwlR4mBZyAb0!QzeagAhS1j1X31_djYRK0OWvxwuVDxXmH5=
CS3C246999Rr81o-pmzmqPwWxBaEhHHNZV5eAR7Csgr6YCleJJ-ngJhL8_$
Group Owner: main+owner_at_ammrl.groups.io
-=-=-=-=-=-=-=-=-=-=-=-
Received on Fri Feb 28 2025 - 11:53:08 MST